top of page
reciclaje de plomo

LEAD RECYCLING
Cleaner Production Technologies

Lead is a metal widely used in industry and commerce. As a metal, it can be recycled from various sources, with spent lead-acid batteries currently being the most common source.

However, the process of collecting, disposing of, recycling, and refining lead has traditionally been highly polluting and inefficient, often resulting in lead residues or slags of up to 30%, which are then discarded or confined. Because lead is a non-biodegradable material that readily adheres to organic matter, its presence in living organisms and ecosystems is highly toxic.

In the case of used or depleted batteries, the environmental and health impacts are even greater. In addition to lead and other highly toxic metals such as nickel, cadmium, and antimony, the presence of sulfuric acid in batteries makes them significant sources of pollution. Spills of sulfuric acid into the environment are one of the main pollution problems associated with this process.

Our technological developments for lead recycling and used battery management allow for greater efficiency and minimal environmental and health impacts compared to traditional recycling technology.

lead recycling
lead recycling
lead recycling

1. Certified Final Disposal of Used Lead-Acid Batteries.

We provide traceability in the disposal of this highly toxic waste. We certify the final disposal of any lead-acid battery at the recycling plant closest to its point of origin. This ensures compliance with the UN Basel Convention on the Control of Transboundary Disposal of Hazardous Wastes and their Disposal. This convention stipulates that any waste must be treated as close as possible to its point of origin, thus reducing the risk of contamination during transport.

Through the collection and certified final disposal of used batteries, it is ensured that none of their toxic components are discarded before entering the nearest recycling plant. This is crucial because it is common for informal collectors to release the sulfuric acid from the batteries into the environment before delivering them to the recycling plant.

used batteries
used batteries
used batteries

2. Traditional Lead Refining Process

La Tecnología Tradicional de Reciclaje de Baterías toma como estándar los siguientes pasos:

​

  1. Trituración de baterías y drenaje de ácido sulfúrico:

    • En esta etapa inicial, el ácido sulfúrico drenado se neutraliza con algún alcalinizante​, generalmente hidróxido de calcio o cal. Esto porque su costo es menor que usar hidróxido de sodio.

    • El sulfato de calcio (yeso) formado se filtra y se prensa, formando bloques de yeso los que posteriormente se mandan a un vertedero. El yeso formado no puede ser utilizado en ningún proceso, ya que dentro del mismo, se acarrea una alta cantidad de sulfato de plomo, lo que hace que una fracción de plomo llegue al vertedero y al ambiente.

  2. La masa de plomo y plástico triturado se separan por flotación, donde el plástico se recupera para posteriormente ser reciclado en la elaboración de nuevas cajas de baterías.

  3. El plomo y sulfato de plomo húmedos pasan al primer paso de fundición, donde se produce la primera etapa de producción de plomo, o comúnmente conocido como plomo de hornos:

    • La primera etapa de fundición de plomo está diseñada para reducir las diferentes especies químicas del plomo (sulfato de plomo, óxido de plomo, etc) y extraer el plomo para llevarlo a una concentración entre 60% a 80%.​

    • En esta etapa se agregan agentes reductores como coque de petróleo, carbonado de sodio y hierro.

    • Producto de esta etapa se forma lo que se conoce como escoria de hornos, o plomo no lixiviado. Este plomo, que es una mezcla de plomo e impurezas se retiran del proceso y se mandan a confinamiento. La escoria de plomo con la tecnología tradicional puede estar en el orden del 30% del total de material fundido en la primera etapa.

    • Otro de los grandes contaminantes presentes en esta etapa es el azufre. Esto debido a que el azufre remanente que queda del ácido sulfúrico pasa al horno primario. El azufre y sulfuro de hidrógeno producidos en esta etapa, se vaporizan y son expulsados al ambiente, provocando acidez y mal olor en las cercanías de la planta de reciclaje. En algunos procesos se utilizan filtros manga o similares en las chimeneas para atrapar los sólidos no combustionados, siendo poco efectivos para retener gases.

    • Además en el proceso de calentamiento para la fundición se utiliza búnker, con los retos ambientales y tecnológicos que este combustible posee.

  4. El plomo recuperado de la primera fundición, pasa a una etapa de refinación, donde se lleva el plomo a una pureza superior al 99%:

    • El plomo se lleva a una temperatura de 450°C donde se le añade aserrín para extraer remanentes de la primera etapa de fundición.​

    • Posterior se agrega Nitrato de Sodio para oxidar el Antimonio, Arsénico y Estaño presentes en el plomo, los que son retirados por flotación en el plomo fundido. Estos metales son retirados y llevados a confinamiento.

    • Por último se agrega Hidróxido de Sodio y Azufre para remover el hierro y cobre remanentes. Una vez se remueven estos contaminantes, se alcanza una pureza mayor al 99.5% de plomo. 

​​

Todo este proceso de la tecnología tradicional conlleva un alto consumo de materiales reductores y oxidantes. Lo que produce grandes cantidades de escoria y residuos sólidos no tratables. Y cómo estos materiales están presentes en la fundición, una parte importante de la energía de la combustión se pierde en estas impurezas.

​

Esto hace que el proceso de fundición tradicional del plomo, sea altamente costoso y contaminante.

3. Our Lead Recycling Technology

Our technological developments allow the lead recycling industry to achieve significant cost savings through a focus on efficiency and chemical engineering. Furthermore, the advancements in lead recycling offer benefits to the environment and public health.

Below are our technology and process management modules:

a. Technology for Reconditioning Sulfuric Acid

The sulfuric acid from battery crushing is recovered and sent to our sulfuric acid stabilization and reconditioning plant , where impurities are removed and the sulfuric acid concentration is adjusted.

The resulting sulfuric acid is a stabilized, low-metal acid at a 20% concentration. This acid is sold to various industries, where it is used in processes such as:

  • pH control in wastewater treatment plants.

  • pH control in cooling towers.

  • Metal pickling in foundry plants.

  • Manufacturing of raw materials such as copper sulfate, iron or aluminum.

  • Leveling the acid in batteries in use.

This avoids the cost of acid neutralization, and adds value to a waste product, turning it into a highly engineered product.

Acid Before Treatment

20% Reconditioned Acid

Sales for Industrial Processes

battery acid
sulfuric acid
cooling tower

b. Technology for Slag Reduction and Minimization of Foundry Additives

Our chemical oxidation-reduction technology for lead allows us to obtain the following benefits in the primary smelting and refining processes:

  • Minimizing sulfur and lead sulfates in the feed to the primary smelting furnace.

  • Reduction of lead slag to below 10%.

  • Minimal coke and iron consumption.

  • Sequential elimination of the use of sodium carbonate as a slag binder.

  • Elimination of the use of sodium nitrate in the refining stage.

  • Energy efficiency in the use of environmentally friendly fuels.

With these technologies, the company can significantly reduce its slag production and eliminate the use of expensive chemical additives such as sodium nitrate and sodium carbonate.

lead recycling
lead recycling

Our offices:

Flor de Campo Industrial Complex. Km 32 Pacific Highway. Amatitlán. Guatemala. Central America

Telephone numbers / email:

Psalm 60:12, "With God we will do mighty things"

bottom of page